User Tools

Site Tools


dmx_definitions:fade

This is an old revision of the document!


Table of Contents

Fade

When using certain DMX Controlers settting the fade option means it will gradually go through the DMX values from your set Starting point to the set ending point at the set fade time.

For example you have a 2 channel strobe on the first channel it controls the dimmer you set it to go from 0% (0 Value) to 100% (255 Value) by using fade. the controller will then go at the set fade time1) :
1%
2%
3%
etc etc all the way to 100% thus creating a fade effect.

The number of steps, (not programmed steps), it will take to go from it's starting value to it's ending value will depend on the amount of time the fade is given. i.e. the larger the fade time then the smoother the fade transition will be.

Use fade time to make your moving lights move from one position to another in a smooth and uniformed manner. Without fade it would jump (Snap) from position A to position B.

See Also:
1)
Be aware if the Fade time is shorter than the scene time your light will finish getting to the desired value (For example a movement left to right) before the end of the scene time meaning you light will have 'pause' when completed until the scene time expires, you may want this if you don't ensure that the fade time and the scene time are identical (In movement if you set them identically your light will sweep continuously and won't stop in any places a good effect for some!) similarly if your fade time is longer than your scene time your light won't make it to the desired setting and will move onto the next scene!
dmx_definitions/fade.1348643104.txt.gz · Last modified: 2013/03/12 21:32 (external edit)

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki