Differences

This shows you the differences between two versions of the page.

--- dmx_basics:dmx_how_to_set_addresses [2012/09/09 21:59] – external edit 127.0.0.1
+++ dmx_basics:dmx_how_to_set_addresses [2013/03/12 22:03] (current) – external edit 127.0.0.1
@@ Line 84: / Line 84: @@
 So find the DMX Addressing menu and change the value with the up/down buttons.\\
 And find the wanted mode here “PERS” and for the fun of it, it could be a simple RGB mode, ARC1.\\
-Remember that the mode must match the fixture in FreeStyler.\\
+Remember that the mode must match the fixture in the DMX Software.\\
-If these two settings don't match then a address overlab will occur and the fixture control fail.\\
+If these two settings don't match then a address overlabpwill occur and the fixture control fail.\\
 See. [[dmx_basics:dmx_addresses|]]\\
 \\
@@ Line 92: / Line 92: @@
 \\
 ----
-\\
+===== See Also =====
+[[dmx_definitions:dip_switches|Definition Page with Dip Switch Calculator]]