User Tools

Site Tools


Table of Contents


LTP in stage lighting stands for Latest Takes Precedence.

What this means is that regardless what value a channel is set at, a signal that is sent using LTP will overide what is all ready there. i.e. the “latest” signal is the one that will be used.

For example if channel 1 has a DMX value of 128 and you send a LTP DMX value of 175 the new value for the channel will be 175. It has been overidden. If a new LTP DMX signal is sent on the same channel it will take that value.

See Also:
dmx_definitions/ltp.txt · Last modified: 2013/03/12 22:03 by

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki